Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Nathan Woolard]

I am a theater teacher and already have a wired DMX system setup, but I am thinking of adding some DMX fixtures run wirelessly. If I get a wireless transmitter and receivers, can I plug the transmitter into the last fixture of my daisy chain and then put a receiver on one of my new fixtures to run it wirelessly? (If this is possible, then I would prefer this method, so that I can have the majority of my lights being controlled by a direct-to-controller wired connection.) Or do I have to plug in the transmitter directly to the DMX controller and put the receiver on the first fixture in the daisy chain (which would in turn make all of my lights depend on the wireless connection)?

[Mac Kerr]

I am a theater teacher and already have a wired DMX system setup

Please go to your profile and change the "Name" field to your real first and last name as required by the posting rules displayed in the header at the top of the section, and in the Site Rules and Suggestions in the Forum Announcements section, and on the registration page when you registered.

Mac
admin

[ProSoundWeb Community]