ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1] 2  All   Go Down

Author Topic: Decent IEC cables  (Read 1843 times)

Kemper Watson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 710
  • Woodstock GA
Decent IEC cables
« on: January 06, 2024, 08:14:46 PM »

Who makes a decent 3-ft IEC Cable? I bought a few from one site and about half were bad. Trying to clean up and simplify  the light rig..
Logged

Bob Faulkner

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1504
  • Raleigh, NC
Re: Decent IEC cables
« Reply #1 on: January 06, 2024, 08:51:36 PM »

Logged

Geoff Doane

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 957
  • Halifax, NS
Re: Decent IEC cables
« Reply #2 on: January 06, 2024, 09:02:39 PM »

Who makes a decent 3-ft IEC Cable? I bought a few from one site and about half were bad. Trying to clean up and simplify  the light rig..

Amazon cheapies?

I usually seem to have plenty of them around, although when I was looking for short ones a few years ago I bought Volex. Unfortunately they don't seem to be available any longer from my usual suppliers.  More recently I bought some Tripp Lite IEC-to-IEC cables for linking cabinets.  They have survived two summers of constantly being set up and torn down with no problems.  Tripp Lite also has a locking version (that fits any IEC inlet) that has worked out well for my A&H digital stage boxes.  The Tripp Lite stuff is not cheap, but I don't feel too bad spending extra on mission critical stuff like AC cords.

GTD
Logged

Brian Adams

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 577
    • Adams Production Services
Re: Decent IEC cables
« Reply #3 on: January 06, 2024, 09:19:01 PM »

I've used several hundred Monoprice IEC cables over the years and they've been great.
Logged
Brian Adams
Adams Production Services
Vermillion, SD
adamsproductionservices.com

brian maddox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3272
  • HeyYahWon! ttsss! ttsss!
Re: Decent IEC cables
« Reply #4 on: January 06, 2024, 09:36:50 PM »

I've used several hundred Monoprice IEC cables over the years and they've been great.

this^^
Logged
"It feels wrong to be in the audience.  And it's too peopley!" - Steve Smith

brian maddox
[email protected]
Savannah, GA

'...do not trifle with the affairs of dragons...

       ....for you are crunchy, and taste good with ketchup...'

Kemper Watson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 710
  • Woodstock GA
Re: Decent IEC cables
« Reply #5 on: January 07, 2024, 06:30:50 AM »

I've used several hundred Monoprice IEC cables over the years and they've been great.

That's where these were from. Got 15.  8 bad so far. 6 were bad straight out of the box. Two quit after their first use.
Logged

Frank Koenig

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1329
  • Palo Alto, CA USA
Re: Decent IEC cables
« Reply #6 on: January 07, 2024, 11:45:10 AM »

Here's an option:
https://www.stayonline.com/category/c-nema-straight-blade-cords.asp

I’ve bought short IEC cords and other stuff from Stayonline. Always happy. --Frank
Logged
"Nature abhors a vacuum tube." -- John Pierce, Bell Labs

Brian Adams

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 577
    • Adams Production Services
Re: Decent IEC cables
« Reply #7 on: January 07, 2024, 12:41:53 PM »

That's where these were from. Got 15.  8 bad so far. 6 were bad straight out of the box. Two quit after their first use.

Wow, that's disappointing. I wonder what changed since the last time I bought them. I've used literally hundreds of their IEC's over the years and I don't remember a single bad one.

Did you get in touch with the company? They're usually very responsive. At least in my experience.
Logged
Brian Adams
Adams Production Services
Vermillion, SD
adamsproductionservices.com

brian maddox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3272
  • HeyYahWon! ttsss! ttsss!
Re: Decent IEC cables
« Reply #8 on: January 07, 2024, 01:52:34 PM »

That's where these were from. Got 15.  8 bad so far. 6 were bad straight out of the box. Two quit after their first use.

Sounds like Monoprice got a bad batch from somewhere. There's no question that they have to be using various OEMs to keep their prices so low. I've bought a TON of ethernet cables from them and had a few be bad out of the bag, but they're so cheap and the rest have been so good that it's still a good value.

yeah, I'd contact them. I suspect they'd like to isolate the batch as much as you'd like to have a working product.
Logged
"It feels wrong to be in the audience.  And it's too peopley!" - Steve Smith

brian maddox
[email protected]
Savannah, GA

'...do not trifle with the affairs of dragons...

       ....for you are crunchy, and taste good with ketchup...'

Mike Pyle

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1219
  • Santa Rosa, CA
Re: Decent IEC cables
« Reply #9 on: January 07, 2024, 02:18:49 PM »

Who makes a decent 3-ft IEC Cable? I bought a few from one site and about half were bad. Trying to clean up and simplify  the light rig..

Hosa.
Logged
Mike Pyle  Audiopyle Sound  707-315-6204
Dealer For: JBL, Soundcraft, Crown, dbx, AKG, Yorkville, EV, QSC, RCF, FBT, Danley Sound Labs, Meyer Sound, Fulcrum Acoustic, Tannoy, Lab Gruppen, Powersoft, Linea Research, EAW, Allen & Heath, Ashly, APB, Audix, One Systems, Presonus, K&M, Ultimate, Global Truss, Intellistage, SKB, Gator, Radial Engineering, Turbosound, Midas, dB Technologies, American DJ, Odyssey, ProCo, Rapco, CBI, Elation, Mipro, Chauvet, Blizzard, Shure, Whirlwind, Bassboss, Yamaha, Line 6, Behringer, On-Stage, more...

ProSoundWeb Community

Re: Decent IEC cables
« Reply #9 on: January 07, 2024, 02:18:49 PM »


Pages: [1] 2  All   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.033 seconds with 24 queries.