ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2] 3  All   Go Down

Author Topic: I must have been doing it all wrong...  (Read 8458 times)

Mike Sokol

  • Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3361
  • Lead instructor for the No~Shock~Zone
    • No~Shock~Zone Electrical Safety
Re: I must have been doing it all wrong...
« Reply #10 on: April 03, 2017, 01:16:38 PM »

I like how the guy probe the wire for voltage...

I don't need no stinkin' meter.  :o.
One of the plant electricians I worked with 40 years ago would tap a live wire between his pinky and thumb, then depending how high his hand jumped tell you if it was 120, 208, or 277/480 volts. DO NOT DO THIS!!!

Jonathan Johnson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3210
  • Southwest Washington (state, not DC)
Re: I must have been doing it all wrong...
« Reply #11 on: April 03, 2017, 02:06:45 PM »

I don't need no stinkin' meter.  :o.
One of the plant electricians I worked with 40 years ago would tap a live wire between his pinky and thumb, then depending how high his hand jumped tell you if it was 120, 208, or 277/480 volts. DO NOT DO THIS!!!

My grandpa had extremely dry skin. He would work on his electric fence barehanded.

He said he just felt a little tingle. Anyone else was knocked on their butt if they just touched it.

He worked on 120v live, too. The outlet in the barn (8 feet from the hay storage area) had no fuse. The only way to kill the power was cut the wire or pull the meter.
Logged
Stop confusing the issue with facts and logic!

Jay Barracato

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2025
  • Solomons, MD
Re: I must have been doing it all wrong...
« Reply #12 on: April 03, 2017, 02:53:37 PM »

I don't need no stinkin' meter.  :o.
One of the plant electricians I worked with 40 years ago would tap a live wire between his pinky and thumb, then depending how high his hand jumped tell you if it was 120, 208, or 277/480 volts. DO NOT DO THIS!!!
I worked in construction with an electrician that did that for 30 years. Until the one time it hit him on the exact wrong moment in his heart rhythm.

Sent from my XT1254 using Tapatalk

Logged
Jay Barracato

Tim Hite

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1221
    • Bad Quail
Re: I must have been doing it all wrong...
« Reply #13 on: April 04, 2017, 04:06:38 AM »

Check at about 6 minutes on how to properly connect the power to your sound system

https://youtu.be/r823cA85q_c

Well executed KF850 clones. The text here says all you need to know. . .
https://youtu.be/r823cA85q_c?t=8m57s


Only thing harder than the first guy pulling powers the second guy pulling power. . .
https://youtu.be/r823cA85q_c?t=20m57s

and in Part II they break out the voltage stabilizer. . .replete with a fresh coat of paint. . .
https://youtu.be/02SZfYkVKr8?t=13m45s

Sound come real soon mon!!!
Logged
Bad Quail
Sound + Light + Image
Joshua Tree, California
Authorized Dealer for all this stuff

Mike Sokol

  • Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3361
  • Lead instructor for the No~Shock~Zone
    • No~Shock~Zone Electrical Safety
Re: I must have been doing it all wrong...
« Reply #14 on: April 04, 2017, 10:27:26 AM »

Sound come real soon mon!!!

The live sound company I worked for years ago used to do production for Ziggy Marley. I recognize that same EQ curve...

Milt Hathaway

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2302
    • http://www.fitzcosound.com
Re: I must have been doing it all wrong...
« Reply #15 on: April 04, 2017, 10:39:57 AM »

Only wimps need a roof to stand on when tying in power.
Logged
--
Milt
FitzCo Sound, Inc.
Midland, TX
http://www.fitzcosound.com

Stephen Swaffer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2673
Re: I must have been doing it all wrong...
« Reply #16 on: April 04, 2017, 12:42:57 PM »

You never see any old guys doing that...wonder why?
Logged
Steve Swaffer

TJ (Tom) Cornish

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4318
  • St. Paul, MN
Re: I must have been doing it all wrong...
« Reply #17 on: April 04, 2017, 04:33:34 PM »

You never see any old guys doing that...wonder why?
That picture seems to show insulators indicative of higher than 120/208v power, but the guy's presumably sweaty shirt is apparently not zapping him, so must not be.

Agreed - doubly deadly - if you aren't electrocuted, the fall will probably kill you.
Logged

Ed Hall

  • Classic LAB
  • Sr. Member
  • *
  • Offline Offline
  • Posts: 260
  • Lansdale, PA
Re: I must have been doing it all wrong...
« Reply #18 on: April 04, 2017, 05:11:17 PM »

Only wimps need a roof to stand on when tying in power.

There's a phrase to describe situations like this.

Natural Selection!
Logged
I can't change reality just because you don't like it!

David Allred

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1904
Re: I must have been doing it all wrong...
« Reply #19 on: April 05, 2017, 10:46:50 AM »

The live sound company I worked for years ago used to do production for Ziggy Marley. I recognize that same EQ curve...

Naw.  That EQ is serving as band pass to the subs. :)
Logged

ProSoundWeb Community

Re: I must have been doing it all wrong...
« Reply #19 on: April 05, 2017, 10:46:50 AM »


Pages: 1 [2] 3  All   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.031 seconds with 25 queries.