ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: PSM 900 volume limit..  (Read 2043 times)

Al Rettich

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 603
PSM 900 volume limit..
« on: March 27, 2013, 11:11:44 PM »

Ok.. Here's the scoop..

PSM900 pack in cuemix. Before we enter in cuemix mode the volume limit is turned off. Add freq's to cuemix mode, the volume limit comes on. Whole mix sounds compressed.. Obviously it is. But how do you take the volume limit off in cuemix mode?
Logged

John Sulek

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 609
  • Toronto Canada
Re: PSM 900 volume limit..
« Reply #1 on: March 27, 2013, 11:44:13 PM »

Ok.. Here's the scoop..

PSM900 pack in cuemix. Before we enter in cuemix mode the volume limit is turned off. Add freq's to cuemix mode, the volume limit comes on. Whole mix sounds compressed.. Obviously it is. But how do you take the volume limit off in cuemix mode?

On the transmitters, go to the ultilities menu.
Under the "RX SETUP" make sure it is set to "KEEP" (the default setting) which will not transfer the volume limit, mode, balance, hi boost during bodypack sync.

It sounds like one of your transmitters is not on this setting and is changing the bodtpack as you sync to add it to the cuemix list.

Hope this helps.
Logged

ProSoundWeb Community

Re: PSM 900 volume limit..
« Reply #1 on: March 27, 2013, 11:44:13 PM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.029 seconds with 19 queries.