ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 ... 4 5 [6]   Go Down

Author Topic: still wondering  (Read 20191 times)

Too Tall (Curtis H. List)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1591
Re: More HL10 horn talk...
« Reply #50 on: October 09, 2004, 04:08:53 pm »

[quote title=Michael M wrote on Sat, 09 October 2004 14:51]
Too Tall wrote on Sat, 09 October 2004 07:25
Hi Mark,
   Al is constantly having screws back out. Mostly on all the handles (they are on T-nuts) and I believe also on the access plate. snip
[/quote



Have you guys given loctite a go on the bolts? I've used it on acess panel bolts on my own horns (not labs though..) and they're staying tight as they were when I put them in Smile




I don't believe he is using anything like that.
Too Tall
Logged
Too Tall
        Curtis H. List    
             Bridgeport, Mich.   
        I.A.T.S.E. Local # 274 (Gold Card)
        Lansing, Mich
Independent Live Sound Engineer (and I'm Tall Too!)

Roy Eikamp

  • Newbie
  • *
  • Offline Offline
  • Posts: 13
Re: still wondering
« Reply #51 on: October 15, 2004, 08:15:16 pm »

I completed Cowan audio's horn sub jr.;loaded with eminence delta 10's that I had laying around. This is my first listen to  a horn sub. what a difference a horn makes.It was crossed over at 80hz and powered with a microtech 1000 parallel mono to both drivers.really kiks butt considering the low power components. Forgot to mention using dbx 234xl xover for subs and a driverack 260 stereo tri amped tops;delayed to 6 milliseconds.This sub project is a warm up and intro to horn subs;lab sub also in progress. My hats off to Mr. Cowan of Cowan audio and a special thanks to all on this forum who have contributed to my ongoing priceless education.

v/r
Roy A. Eikamp
Logged
Pages: 1 ... 4 5 [6]   Go Up
 

Page created in 0.037 seconds with 20 queries.