Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[John Sulek]

 My TTi PSA2702 has suddenly ceased to read any signal from the antenna input. All the non radio functions work fine (screen, controls,etc). The sma connector seems solid and has had a sacrificial adapter on it since new.
 I did try the same sma-bnc adapter and antenna on an older unit and they are fine.
 While I suspect that this might be just EOL for this unit, I wondered if anyone else has experienced this.
 Maybe it took a static discharge hit at the antenna connector, but it was in the same carrying case as always when not in use with the antenna connected.
 Time to start shopping around.

[Ike Zimbel]

My TTi PSA2702 has suddenly ceased to read any signal from the antenna input. All the non radio functions work fine (screen, controls,etc). The sma connector seems solid and has had a sacrificial adapter on it since new.
 I did try the same sma-bnc adapter and antenna on an older unit and they are fine.
 While I suspect that this might be just EOL for this unit, I wondered if anyone else has experienced this.
 Maybe it took a static discharge hit at the antenna connector, but it was in the same carrying case as always when not in use with the antenna connected.
 Time to start shopping around.

Hi John,
It's worth reaching out to TTi to at least see about service. They've taken good care of me in the past. I've e-mailed you the contact info.

[John Sulek]

Hi John,
It's worth reaching out to TTi to at least see about service. They've taken good care of me in the past. I've e-mailed you the contact info.

Thanks Ike!

[Russell Ault]

{...} Maybe it took a static discharge hit at the antenna connector, but it was in the same carrying case as always when not in use with the antenna connected. {...}

Question out of ignorance: does storing a device like this with an antenna connected provide protection against EMF-related damage? For some reason I had it in my head that an SMA terminator was the way to go (although maybe a shunt would be better?).

-Russ

[John Sulek]

Question out of ignorance: does storing a device like this with an antenna connected provide protection against EMF-related damage? For some reason I had it in my head that an SMA terminator was the way to go (although maybe a shunt would be better?).

-Russ

That is probably the best practice. I just have a plastic cap that I place over the bnc to keep crud out when the antenna is not connected.
Not sure what happened as this unit has been in all sorts of bad weather outdoors, been on shows with multiple radios near by, etc. and has just kept on working-until it didn't.
I have an email into the UK service folks to see what the repair charges are.

[Pete Erskine]

I HAVE A TTI 6000 SOMETHING THAT STOPPED WORKING....If anyone wants it for free, let me know   

[email protected]

[Ike Zimbel]

I HAVE A TTI 6000 SOMETHING THAT STOPPED WORKING....If anyone wants it for free, let me know   

[email protected]

I'll PM ya!

[ProSoundWeb Community]