ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Meyer Sound speaker system  (Read 1259 times)

Kent Clasen

  • Full Member
  • ***
  • Offline Offline
  • Posts: 187
Meyer Sound speaker system
« on: May 31, 2022, 01:49:06 PM »

Since refurbishing this system it has done 1 gig. It sounds great. I have some carts with castors for USWs and the UPAs can stack on top with straps. If interested send me an email for pix etc. [email protected]

4- UPA1C 1x12, 1x HF
2- USW1 2x15
2- 650P 2x18 self-powered
1- Furman PL8
1- Ashly 3.6sp w/ aux sub preset L/R UPA dialed/aligned via SMAART- this unit may need repair and is not required.
2- M1A processors for L/R UPA + wired to amp outputs for sense
1- B2 processor for Mono USW + wired to amp outputs for sense
1- Chevin Q-6 4 channel amp = UPA stereo LF/HF
1- QSC GX5 = USW-1
In/out engraved patch panel
2- 1 NL4 to 2 NL4 box for UPA homerun split at stack
4- Meyer Yokes / 2 w/pole mount for tripod use
12 ru OSP rack w/castors -like new
All Speakon 4 conductor 13awg cables used once
2x XLR for 650P

New foam grilles on UPA/USW1 and new Meyer badges
New paint on UPA/USW
Cleaned and tested
UPAs are all updated to UPA1C version w m1401B HF driver w/throat extension + Y1PD HF circuit.
Have over $7000 invested and many hours. Located near Kansas City. I will not respond if you ask if available. If you see the post it is available. Price $6000.00

« Last Edit: June 04, 2022, 12:04:24 AM by Kent Clasen »

ProSoundWeb Community

Meyer Sound speaker system
« on: May 31, 2022, 01:49:06 PM »

Pages: [1]   Go Up

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.027 seconds with 24 queries.