ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Allen and Heath Qu32 send an entire mix output to FX engine  (Read 308 times)

Steve Hanis

  • Newbie
  • *
  • Offline Offline
  • Posts: 14

Is there a way to add FX to an entire mix output such as mix 5-6?
Basically sending all 32 channels to the mix 5-6 FX engine and having the FX return to the mix 5-6 output, like an old school insert.
Thanks!
Logged

Nathan Riddle

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2005
  • Niceville, FL
    • Nailed Productions
Re: Allen and Heath Qu32 send an entire mix output to FX engine
« Reply #1 on: May 06, 2022, 11:42:57 AM »

You tell me.

Teaching to fish and all that.
Logged
I'm just a guy trying to do the next right thing.

This business is for people with too much energy for desk jobs and too much brain for labor jobs. - Scott Helmke

Mike Caldwell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2459
  • Covington, Ohio
    • Mike Caldwell Audio Productions
Re: Allen and Heath Qu32 send an entire mix output to FX engine
« Reply #2 on: May 06, 2022, 05:46:15 PM »

Yes you can.....select mix 5-6, that puts the board in the sends on fader mode, go to the FX return layer, bring up the fader for the FX you want to send to mix 5-6.
De-select mix 5-6 to put the mixer back into L-R mix mode.


Think of the FX return channels just like any other input channel on the mixer.
Do not send an FX return back into it self via the FX sends.

ProSoundWeb Community

Re: Allen and Heath Qu32 send an entire mix output to FX engine
« Reply #2 on: May 06, 2022, 05:46:15 PM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.125 seconds with 23 queries.