ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: Temp install help - Danley SH-96HO  (Read 4851 times)

duane massey

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1636
Re: Temp install help - Danley SH-96HO
« Reply #10 on: June 11, 2015, 11:50:18 pm »

Didn't even think of spansets, as I don't do temporary hangs. Definitely the best choice.
Logged
Duane Massey
Technician, musician, stubborn old guy
Houston, Texas

Jason Lavoie

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
Re: Temp install help - Danley SH-96HO
« Reply #11 on: June 12, 2015, 09:48:08 pm »

I've done this with wire rope/nicopress but ran the rope through some rubber fuel line where it rests against the wood. This way it won't cut or chafe should you find any monkeys swinging from it.

+1
in trying to mechanically isolate some speakers (so they didn't disturb the offices above) I was looking for a bit of rubber between the speakers and the ceiling and found that fuel line was ideal as it is least likely to crush when bent, so the wire rope still passes through easily even at a decent bend radius.

Jason
Logged

ProSoundWeb Community

Re: Temp install help - Danley SH-96HO
« Reply #11 on: June 12, 2015, 09:48:08 pm »


Pages: 1 [2]  All   Go Up
 



Page created in 0.053 seconds with 21 queries.