ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 ... 8 9 [10]   Go Down

Author Topic: 3-light tester RPBG upgrade  (Read 24820 times)

John Roberts {JR}

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 16828
  • Hickory, Mississippi, USA
    • Resotune
Re: 3-light tester RPBG upgrade
« Reply #90 on: March 22, 2015, 04:31:40 PM »

I am still working on this and ideally the human contact is not necessary (so far it still is). It looks like I can limit the sense current to micro-amps not milli-amps, but eliminating it entirely would be even better.

 but not today.

JR
Logged
Cancel the "cancel culture". Do not participate in mob hatred.

John Roberts {JR}

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 16828
  • Hickory, Mississippi, USA
    • Resotune
Re: 3-light tester RPBG upgrade
« Reply #91 on: April 09, 2015, 12:07:52 PM »

OK my parts arrived to make an improved higher impedance touch buffer... I have one project on the bench ahead of this. Ideally I would like to make this not require a human touching it but that might be easier to build into a smart outlet strip than a small hand held tester. If I can get the sensitivity high enough there may be no need to touch anything.

No promises... only hopes..

JR
Logged
Cancel the "cancel culture". Do not participate in mob hatred.

Jordan Wolf

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1391
  • Location: Collingswood, NJ
Re: 3-light tester RPBG upgrade
« Reply #92 on: April 11, 2015, 01:52:02 PM »

Thanks for the update, JR. I've been following this thread with anticipation and am excited whenever there are updates.

This could be a very handy gadget for hotel world...
Logged
Jordan Wolf
<><

"We want our sound to go into the soul of the audience, and see if it can awaken some little thing in their minds... Cause there are so many sleeping people." - Jimi Hendrix

John Roberts {JR}

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 16828
  • Hickory, Mississippi, USA
    • Resotune
Re: 3-light tester RPBG upgrade
« Reply #93 on: April 12, 2015, 01:09:03 PM »

In the meanwhile you can do a lot with the simple neon lamp probe.

Working on my other project today but the outlet tester is still on my bucket list.  8)

JR
Logged
Cancel the "cancel culture". Do not participate in mob hatred.

ProSoundWeb Community

Re: 3-light tester RPBG upgrade
« Reply #93 on: April 12, 2015, 01:09:03 PM »


Pages: 1 ... 8 9 [10]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.074 seconds with 21 queries.