Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Adam Wh3tham]

Is there any other little adapter like the RDL TX-J2 that has phoenix connectors on both sides?  I really don't want to be soldering resistors in the back of the install rack, as its rather cramped.

I keep finding some great little bits that are causing some headaches. Installer just took the left and right signal and twisted them together...

[David Sturzenbecher]

Is there any other little adapter like the RDL TX-J2 that has phoenix connectors on both sides?  I really don't want to be soldering resistors in the back of the install rack, as its rather cramped.

I keep finding some great little bits that are causing some headaches. Installer just took the left and right signal and twisted them together...

This gets you close...
http://www.rapcohorizon.com/p-376-tdiblox.aspx


edit...nevermind, i miss-read your request...

[Keith Broughton]

http://www.bhphotovideo.com/c/product/657277-REG/Whirlwind_PODDI_podDI_Personal_Audio.html

[Tommy Peel]

http://www.amazon.com/Rapco-Horizon-LTIGLBLOX-Laptop-Interface/dp/B003MLBEYK/ref=wl_it_dp_o_pC_S_nC?ie=UTF8&colid=27UOAS25NOAZU&coliid=I7OB0O17HULT0

[Adam Wh3tham]

So I'll take that as a no.... Dang it, Guess its soldering up resistors in the back of the rack.

Closest I found was this guy

EDIT:

Found another option. This guy I can throw Phoenix connectors on the other side and i'll be set.
Thanks for the idea's though.
http://www.atlassound.com/Product/1756/1654/AMPLIFIERS/ACCESSORIES/AA-YSUM

[Hal Bissinger/COMSYSTEC]

Dunno, if it was me I would take a few minutes and build my own out of a small enclosure and Phoenix connectors, especially if I needed more than one. They should go pretty quick once you design and assemble the first one.
 
-Hal

[Scott Carneval]

Dunno, if it was me I would take a few minutes and build my own out of a small enclosure and Phoenix connectors, especially if I needed more than one. They should go pretty quick once you design and assemble the first one.
 
-Hal

Doesn't use phoenix connectors, but they are screw down barrier strips.

http://www.rdlnet.com/product.php?page=82

[Ray Cerwinski]

Doesn't use phoenix connectors, but they are screw down barrier strips.

http://www.rdlnet.com/product.php?page=82

I think this would be closer to what he's looking for...

http://www.rdlnet.com/product.php?page=53

...but it's still an active product that would require a power supply and is most likely overkill and out of budget if there are a substantial amount of sources that must be summed down.

[Arthur Skudra]

Maybe one of these?

http://www.edcorusa.com/c/40/cbseries

OR

http://www.edcorusa.com/c/44/s2mseries

[Hal Bissinger/COMSYSTEC]

Maybe one of these?

http://www.edcorusa.com/c/40/cbseries

OR

http://www.edcorusa.com/c/44/s2mseries

Looks like Arthur wins the prize with the S2M-E! Tell him what he's won Adam!

-Hal

[ProSoundWeb Community]