ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: EVX-155 replacement?  (Read 2548 times)

Shawn Parmer

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 52
  • Decatur, IL
EVX-155 replacement?
« on: April 12, 2013, 09:38:36 pm »

It seems the EVX-155 driver has been discontinued.  Is there a compatible replacement driver out?
Logged

Paul G. OBrien

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1154
Re: EVX-155 replacement?
« Reply #1 on: April 13, 2013, 11:31:28 am »

There are a lot of potential superior replacements available now.. but the ideal driver will be determined by the cabinet it's going in.
Logged

Tim McCulloch

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 21975
  • Wichita, Kansas USA
Re: EVX-155 replacement?
« Reply #2 on: April 13, 2013, 11:48:37 am »

It seems the EVX-155 driver has been discontinued.  Is there a compatible replacement driver out?

Do you need a whole speaker or do you need a blown speaker reconed?

If EV does not have parts (unlikely but possible), there is a good chance that service centers will have either genuine EV parts or after-market kits.

If you are in the USA, try Orange County Speaker www.speakerrepair.com or Pro Sound Service www.prosoundservice.com

Logged
"Practicing an art, no matter how well or badly, is a way to make your soul grow, for heaven's sake. Sing in the shower. Dance to the radio. Tell stories. Write a poem to a friend, even a lousy poem. Do it as well as you possible can. You will get an enormous reward. You will have created something."  - Kurt Vonnegut

Greg_Cameron

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 668
    • Cameron Pro Audio
Re: EVX-155 replacement?
« Reply #3 on: April 13, 2013, 01:38:18 pm »

It's not discontinued, just on back order. Rat Sound can get them for you but there's some lead time. The new P/N is F01U278397. I was quoted $325 and a few units available back in Feb. EV still uses it in a couple of higher end speaker models. FWIW, you can use the older EVX-150A which is basically the same driver, just a bit heavier.
« Last Edit: April 13, 2013, 01:39:50 pm by Greg Cameron »
Logged
"Procrastinators of the world - contemplate uniting!"

Cameron Pro Audio

Shawn Parmer

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 52
  • Decatur, IL
Re: EVX-155 replacement?
« Reply #4 on: April 13, 2013, 02:44:48 pm »

There are a lot of potential superior replacements available now.. but the ideal driver will be determined by the cabinet it's going in.

The problem is it needs to match the other drivers in the existing boxes.

Do you need a whole speaker or do you need a blown speaker reconed?

If EV does not have parts (unlikely but possible), there is a good chance that service centers will have either genuine EV parts or after-market kits.

If you are in the USA, try Orange County Speaker www.speakerrepair.com or Pro Sound Service www.prosoundservice.com


A recone for now.  Just was worried that I might not be able to get the full driver if something happened to damage it.

It's not discontinued, just on back order. Rat Sound can get them for you but there's some lead time. The new P/N is F01U278397. I was quoted $325 and a few units available back in Feb. EV still uses it in a couple of higher end speaker models. FWIW, you can use the older EVX-150A which is basically the same driver, just a bit heavier.

I thought they were using the 155PL in all their newer equipment?
Logged

Greg_Cameron

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 668
    • Cameron Pro Audio
Re: EVX-155 replacement?
« Reply #5 on: April 16, 2013, 02:31:23 pm »

I thought they were using the 155PL in all their newer equipment?

That's true of line source stuff. According to the current catalog, the Xi series & Xw series 15s are still EVX155.

Greg
Logged
"Procrastinators of the world - contemplate uniting!"

Cameron Pro Audio

ProSoundWeb Community

Re: EVX-155 replacement?
« Reply #5 on: April 16, 2013, 02:31:23 pm »


Pages: [1]   Go Up
 



Page created in 0.036 seconds with 22 queries.