ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: calcualting gain structure with labs  (Read 1382 times)

jeffhtg (Jeff Kenney)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1019
calcualting gain structure with labs
« on: December 11, 2008, 06:16:05 pm »

So how does this work with horns - and specifically labs?
Logged

Ivan Beaver

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 9010
Re: calcualting gain structure with labs
« Reply #1 on: December 11, 2008, 07:38:00 pm »

Depends on exactly you are trying to achieve.

Gain structure means different things to different people.

In most cases the loudspeakers themselves have no bearing on it.

It is all electronic level adjustment.

One of the most common ways is to have all the system components clip at the same time.  This will lower you noise floor to its lowest level.  But not everybody needs a really quite noise floor.

A very common misconception is that proper gain structure will maximize your headroom.  That is false.  Your headroom is solely determined by the amp size and the loudspeaker sensitivity.  As long as nothing clips before the amps do, you CANNOT get any more headroom, no matter what adjustments you make upstream.

Now if you are trying to calculate a particular SPL at a particular distance and the proper amp size, it can get a bit more complicated.
Logged
For every complicated question-there is a simple- easy to understand WRONG answer.

Can I have some more talent in the monitors--PLEASE?

Ivan Beaver
dB Audio & Video Inc.
Danley Sound Labs
Pages: [1]   Go Up
 

Page created in 0.054 seconds with 21 queries.