ProSoundWeb Community

Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums => Lighting Forum => Topic started by: dmarin on January 03, 2019, 09:24:14 pm

Title: Par can DMX problem
Post by: dmarin on January 03, 2019, 09:24:14 pm
Hello, I own a cheap standard 512 DMX controller and 4 brand new (cheap Chinese) par cans.
The par cans are working properly standalone without DMX, but when I connect them to the console no signal and no control to the lights!
The cable is DMX, the address is correct, and I use also a terminator with 120ohm resistor.
The console also has a polarity switch but no luck!
I forgot to mention that I test once at a time and not all together! Also the console is working properly with other "more expensive" lights as ADJ etc.

Please your help!!

Thanks!
Title: Re: Par can DMX problem
Post by: Jeff Lelko on January 03, 2019, 09:43:06 pm
Hello, I own a cheap standard 512 DMX controller and 4 brand new (cheap Chinese) par cans.

Hi there.  Before anyone can help you'll need to change your username to your actual first and last name per the policy you agreed to when signing up.  Until you do that no one will be able to offer assistance.

Thanks!