ProSoundWeb Community

Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums => SR Forum Archives => LAB Subwoofer FUD Forum Archive => Topic started by: Eric Wong! on May 20, 2004, 02:40:19 am

Title: When building a pair...
Post by: Eric Wong! on May 20, 2004, 02:40:19 am
...should I do both a little at a time, or should I finish one and then do the other?  I'm thinking I should do both at the same time.  That way the 2nd one wont wind up looking 10x better then the 1st one.  I am excited about it though, hopefully I'll start next week.  
Title: Re: When building a pair...
Post by: Marjan Milosevic on May 20, 2004, 04:10:57 am
Hi Eric,

This is how i did it and that is how most of the others seem did it to.

First cut all pieces for both labs.

First assemle both of the modules (you will loose most of the time on the modules) and then finish the first and then the second one.

Be careful to seal the chambers well.

Have fun

MarjanM