ProSoundWeb Community

Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums => SR Forum Archives => LAB Subwoofer FUD Forum Archive => Topic started by: Rush on April 30, 2004, 04:50:31 pm

Title: Drive Rack setting for LAB Subs
Post by: Rush on April 30, 2004, 04:50:31 pm
 I am in the initail stages of building a pair of subs and would like if  anyone has come up with a PEQ setting for the lab subs with the drive rack PA. I will be driving them with a pair QSC PLX 3002's
Thanks
Rush
Title: Re: Drive Rack setting for LAB Subs
Post by: Timmahh on May 01, 2004, 11:46:00 pm
I see a Problem for you,  Typical settings for delaying your mid cabs to your Labs is about 10.5 ms ave. then you have the high tops if your running 3 way, maybe another 3-8ms depending.  Smaart will let you know this info, beg borrow or rent it if need be. the DriveRack PA only offers 10 ms total delay. thats it.  I d suggest you upgrade to the 260.  it has i beleive 2.3 seconds total of delay time available, this will solve your possible prob.  If on the other hand, you have 2 way tops with a passive xover, you may be able to move your tops around on top of your labs, while using smaart to get the desired results. id sell the PA, move it to the small rack/monitor rack n get the 260 for FOH. Just my opinion. Good Luck!
Timmahh