ProSoundWeb Community

Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums => SR Forum Archives => LAB Lounge FUD Forum Archive => Topic started by: David Blang on April 20, 2004, 04:40:34 pm

Title: dbx 266XL vs. 166XL
Post by: David Blang on April 20, 2004, 04:40:34 pm
What do you get for your extra $100 bucks on the 166?  I assume the sound quality is better but how good of a system would you have to have to notice it?  This would be my first use of a compressor and I'm not even sure how I'm going to use it. (Just on vocal channels, whole mix, future unknown applications)  Is it worth the difference or would the cheaper model work fine for me to play with for now.

Assoc.  Gear

Mackie CFX-12
Yamaha S115IV
Yamaho SM112IV
QSC PLX 1602
QSC RMX 1450
Title: Re: dbx 266XL vs. 166XL
Post by: Greg Cameron on April 20, 2004, 05:08:21 pm
The 166XL has Peak Stop limiters, which may or may not be useful to you. The main issue IMO, is that the auto attack release on the 266 is poor. You're better off using the 266 in manual for the attack/release. The 166 is a noticable improvement.

Cheers,
Greg
Title: Re: dbx 266XL vs. 166XL
Post by: Tim Padrick on April 22, 2004, 03:24:26 am
Be aware that the 166XL's Peak Stop function clips the signal, so things can get a bit ratty sounding if you hit it very much.

The 166XL has a better gate.

For general use (vocals, guitars, etc.) I'd save the $ and go for the 266XL.

Or, if you can come up with $600, you can get a used Presonus ACP88: 8 channels of decent comps and passable gates.