ProSoundWeb Community

Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums => Wireless and Communications => Topic started by: Scott Helmke on October 19, 2020, 12:01:46 pm

Title: Lectro triple block in WWB?
Post by: Scott Helmke on October 19, 2020, 12:01:46 pm
Actually dusting off my brain this morning to do a wireless coordination for our surprise Big 10 football season.

I wanted to try doing the coordination in WWB instead of IAS, but immediately ran into the small annoyance that WWB
doesn't have frequency bands for the newer Lectrosonics triple block gear - block A1, etc.  IAS meanwhile is still using pre-repack station data (I've got a fresh scan, but still...)

Are there any differences between the old number block gear and the newer stuff besides the wider tuning range?  I can make up new profiles in WWB.
Title: Re: Lectro triple block in WWB?
Post by: Scott Helmke on October 19, 2020, 12:14:00 pm
IAS does have all the same intermod settings, so I'm going to go with that.
Title: Re: Lectro triple block in WWB?
Post by: Karl Winkler on October 19, 2020, 12:32:22 pm
IAS does have all the same intermod settings, so I'm going to go with that.

Scott, at least IAS supports the 3-block transmitters. Since you have a fresh scan, that should take care of everything. Let me know if you run into any issues, though.

-Karl
Title: Re: Lectro triple block in WWB?
Post by: Scott Helmke on October 19, 2020, 12:58:45 pm
Scott, at least IAS supports the 3-block transmitters. Since you have a fresh scan, that should take care of everything. Let me know if you run into any issues, though.

-Karl

Thanks Karl!

I'm making another stab at doing it in WWB, so I made a custom profile.  WWB has just gotten so good these days.
Title: Re: Lectro triple block in WWB?
Post by: Russell Ault on October 19, 2020, 04:56:02 pm
[...] I'm making another stab at doing it in WWB, so I made a custom profile. [...]

If you're interested in sharing it, I've created a repository for custom WWB profiles (https://github.com/RussellAult/WWB-Equipment-Profiles); feel free to submit a pull request!  :)

-Russ