ProSoundWeb Community

Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums => Lighting Forum => Topic started by: David Chapman on April 27, 2019, 11:37:11 am

Title: Can I access built in Kam programs etc with dmx desk
Post by: David Chapman on April 27, 2019, 11:37:11 am
Hi

I bought Kam Power Partybar 4 a side led lights.  They came with a wireless foot controller Auto/Sound/Colour/Blackout.  It really isn't very responsive, so I bought a dmx desk off ebay.  All I want to do is access the built in Kam programs and chases etc rather than complex programming.  Is this possible or have I bought the wrong thing? It was only 40 so I was hoping it would be simple but it appears not.


Thanks
Title: Re: Can I access built in Kam programs etc with dmx desk
Post by: Scott Hofmann on April 27, 2019, 12:42:57 pm
From looking at the manual, appears you have to be in 3-channel DMX mode to access the built-in programs:
Title: Re: Can I access built in Kam programs etc with dmx desk
Post by: David Chapman on April 27, 2019, 12:56:21 pm
Thanks, yes I think I was in 20 channel.  I've changed it to 3 channel and the first 2 sliders seem to change the programs every so many numbers you move them up and channel 3 changes the speed.  I was hoping to have a few buttons to press to get to different programs but at least this is a start!  Thanks for your help!
Title: Re: Can I access built in Kam programs etc with dmx desk
Post by: Paul G. OBrien on April 27, 2019, 01:13:22 pm
I was hoping to have a few buttons to press to get to different programs
That's doable. Just put the controller in record mode and save the preset/speed options you want into scenes.