ProSoundWeb Community

Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums => LAB: The Classic Live Audio Board => Topic started by: Jake Jacobs on October 17, 2018, 02:49:52 pm

Title: Firmware question
Post by: Jake Jacobs on October 17, 2018, 02:49:52 pm

Is it unwise to update from Firmware 2.10 straight to 3.09? I recently was appointed Creative arts director at my church and see that the board has v. 2.10. I just want to make sure that updating it directly to 3.09 is safe.

Also - Is there a safe "rollback" in case something goes haywire?

Title: Re: Firmware question
Post by: TJ (Tom) Cornish on October 17, 2018, 03:27:13 pm

Quote from: Jake Jacobs on October 17, 2018, 02:49:52 pm

Is it unwise to update from Firmware 2.10 straight to 3.09? I recently was appointed Creative arts director at my church and see that the board has v. 2.10. I just want to make sure that updating it directly to 3.09 is safe.

Also - Is there a safe "rollback" in case something goes haywire?

would be helpful to have some idea what product you are inquiring about.

Title: Re: Firmware question
Post by: Robert Lofgren on October 17, 2018, 05:59:38 pm

Those numbers corresponds to the x32.

Yes, you can jump directly to v3.09. It is always best practice to perform a backup of your saved data should something go wrong.

You can revert to 2.x at any time with no special means.