ProSoundWeb Community

Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums => Wireless and Communications => Topic started by: David Sturzenbecher on June 27, 2018, 09:41:33 am

Title: Shure 600Mhz hardware conversion
Post by: David Sturzenbecher on June 27, 2018, 09:41:33 am
I don't remember seeing this posted before, but one of our techs opened wireless workbench and was greeted with a prompt that seemed to indicate Shure has firmware allowing 600Mhz band devices to be reprogrammed to stay complaint.

Seem's to be applicable to J5 or L3 (Axient) , J50 or L50 (ULXD QLXD), or J8 or L8 (PSM1000).

Title: Re: Shure 600Mhz hardware conversion
Post by: Scott Helmke on June 27, 2018, 10:05:20 am
It's the post-600MHz *permanent* change to updateable gear in the affected frequency bands. Doing it will keep your gear FCC legal to use, but you may not need to do it right away.
Title: Re: Shure 600Mhz hardware conversion
Post by: Luke Geis on June 27, 2018, 11:40:52 pm
If so, that would be the next best thing since sliced bread!!!