ProSoundWeb Community

Church and H.O.W. Forums for HOW Sound and AV - Your Displayed Name Must Be Your Real Full Name To Post In The Church and HOW Forums => H.O.W. AV => Topic started by: Edd chua on June 11, 2015, 03:11:19 am

Title: Nexo td mk2 controller sense input
Post by: Edd chua on June 11, 2015, 03:11:19 am
Hi all, I need some advice regarding the sense input for td mk2 controller.

The situation is like this now, I have 1x td mk2 controller, sending a left, right and sub signal out to 3 different amps respectively.

Because I have 4 Ps15 (2 for left 2 for right) on my amp I output the signal back to input 2. And so have 2 outputs.

Now the tricky part is how to wired the sense input it back to the td controller?

Or is it the controller's limitation that it can Conwy protect 1x left, 1x right and 1x subs?
Title: Posting Rules
Post by: Mac Kerr on June 11, 2015, 11:06:46 am
Hi all, I need some advice

Please go to your profile and change the "Name" field to your real first and last name as required by the posting rules displayed in the header at the top of the section, and in the Site Rules and Suggestions (http://forums.prosoundweb.com/index.php/board,36.0.html) in the Forum Announcements section, and on the registration page when you registered.

Mac
Title: Re: Nexo td mk2 controller sense input
Post by: Thomas Lamb on August 18, 2015, 02:26:37 pm
Sense outputs are only designed to go to one amp output. What amps do you have? Do you need separate amp ch for each speaker?

Hi all, I need some advice regarding the sense input for td mk2 controller.

The situation is like this now, I have 1x td mk2 controller, sending a left, right and sub signal out to 3 different amps respectively.

Because I have 4 Ps15 (2 for left 2 for right) on my amp I output the signal back to input 2. And so have 2 outputs.

Now the tricky part is how to wired the sense input it back to the td controller?

Or is it the controller's limitation that it can Conwy protect 1x left, 1x right and 1x subs?