ProSoundWeb Community

Marketplace - Your Displayed Name Must Be Your Real Full Name To Post In The Marketplace Forum => Marketplace => Topic started by: Tom Petrusky on April 29, 2015, 04:00:40 pm

Title: WTT Light Viper 32x8 and fiber monitor split for Ethersound sb168-es or madi
Post by: Tom Petrusky on April 29, 2015, 04:00:40 pm
Looking to trade a full 32x8 Light Viper setup including
1 vis1832 Stage box with three option head amp control and 2 monitor optic splits
1 vim 1832 FOH 1u Rack
1 vim 1032 mon 1u rack
2x 32 analog out xlr whip 10'
1x 8 ch analog foh send xlr whip 10'
1x 150' hardened outdoor 2x 62.5 125 nm fiber cable
1x 30'  riser fiber cable for monitor split

This rig will run completely independent on it own but I am in the need to be utilizing Ethernet on a few sites that is already in place where a snake cannot run.
It is all 100% in good working order we just need to change out to the following

2x SB168‑ES
2x MY16-ES64

Perhaps you bought a rig to run Yamaha gear and no longer are in the Yamaha business this rig will work with any boards as they have both analog and aes digital in and outs. Fiber is very common standard fiber with good ST style connections on all equipment so no falling out in the middle of a job from low end vibrations.

 Not everything is pictured
(http://www.lightningaudiopro.com/temp/ls9cards/IMAG0943.jpg)