ProSoundWeb Community

Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums => Lighting Forum => Topic started by: Ronnie Shaffer on March 13, 2011, 11:38:21 pm

Title: Cyberlight drops out
Post by: Ronnie Shaffer on March 13, 2011, 11:38:21 pm
   I have 4 cybers that I rented for a couple seasons then bought a couple years ago. One fixture will fire and operate fine for a while then freeze and lose lamp strike. After a short while the mirror starts responding but the lamp doesn't restrike. If I home the fixture, sometimes it will home & restrike, sometimes it will simply freeze. At the suggestion of the previous owner, I have pulled the multipin cable that jumps from power to control boards and cleaned both ends of cable and pins on board with contact cleaner. It helped for a little while but went back to having problems.
   Has anyone had similar issues and successful fixes? I'm to the point where I'm tempted to take it somewhere for service (but most anywhere is a long way from here)
   Using the dedicated controller (which has intermittent display issues) if that matters
Title: Re: Cyberlight drops out
Post by: duane massey on March 16, 2011, 12:30:01 am
Most likely an issue with the power supply PCB. Call Don Pugh at Lightparts in Austin.
http://www.lightparts.com/