ProSoundWeb Community

Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums => SR Forum Archives => Product Reviews: Sound Reinforcement FUD Forum Archive => Topic started by: Shane Smith on April 25, 2009, 06:43:25 am

Title: new Dynacord CXM15 wedge
Post by: Shane Smith on April 25, 2009, 06:43:25 am
Anybody get a demo of these yet? Or are they even in production yet? Saw them at Frankfurt and have to say they look fantastic, if they can do what they claim and sound good then we could have a winner, provided the pricing isn't astrononimical (which it probably will be).

http://www.youtube.com/watch?v=nWJFRiQCcNo
http://www.dynacord.com/en/news/1/176/

Very lightweight, pole mountable, efficient (102dB) and rated @ 450W RMS so doesn't need a nuclear power station.

Interesting.
Title: Re: new Dynacord CXM15 wedge
Post by: Shane Smith on April 26, 2009, 09:18:45 am
 Rolling Eyes
Title: Re: new Dynacord CXM15 wedge
Post by: Shane Smith on May 27, 2009, 08:25:38 pm
*tumbleweed*
Nobody?
Title: Re: new Dynacord CXM15 wedge
Post by: Jack Wooten on May 27, 2009, 11:29:42 pm
I had a guy at sam ash try to sell me on some of those and i took a yourkville NX-600 in and blew it away

Specifications
System Type 2-Way
Active or Passive Passive
Program Power (Watts) 600
Biampable No
Nominal Impedance (Ohms) 8
Sensitivity (dB @1Watt/1m) 98
Max SPL (dB) 126
Frequency Response (Hz +/- 3db) 60 - 26k
Crossover Frequency (Hz) 1300
Driver Configuration 15 inch / 1.5 inch
HF Driver(s) 1 inch Throat, Ceramic Magnet, 1.5 inch Polyester voicecoil
HF Program Power (Watts) 30
HF Dispersion (
Title: Re: new Dynacord CXM15 wedge
Post by: Jack Wooten on May 27, 2009, 11:31:20 pm
Ant the cutaway. this monitor is a good lil thing it can double as a foh in small appsindex.php/fa/22962/0/
Title: Re: new Dynacord CXM15 wedge
Post by: Shane Smith on May 28, 2009, 06:42:47 am
Thanks Jack, I've yet to hear a plastic box I liked. I could always pick up some ZX5's if I really wanted to go that route. Besides Yorkville don't seem to have much presence over here  Rolling Eyes
Title: Re: new Dynacord CXM15 wedge
Post by: Joseph Curran on May 28, 2009, 07:59:36 am
Story Shane? Alan Murphy in Sound Communications is yer man for all things Bosch (EV/Dynacord/Midas/Klark Teknik)

0872559119
alan@soundcommunications.ie

Title: Re: new Dynacord CXM15 wedge
Post by: Matt Vivlamore on May 28, 2009, 08:09:50 am
Jack, Sam Ash carries Dynacord?

What where they selling that monitor at?
Title: Re: new Dynacord CXM15 wedge
Post by: Jack Wooten on May 28, 2009, 10:03:14 pm
Matt Vivlamore wrote on Thu, 28 May 2009 07:09

Jack, Sam Ash carries Dynacord?

What where they selling that monitor at?

IT has been about 5-6 months and i cant really remember, dont hold me to this but i think around 700 for the powered and 600 for the unpowered.  This was in charlotte nc, if u want u may call them if ur interested. The guy was so excited about them but i was not inpressed at all with the monitors or the racks n stacks.
Title: Re: new Dynacord CXM15 wedge
Post by: Shane Smith on May 28, 2009, 10:06:23 pm
Thanks Joe  Smile

btw Jack the CXM was only revealed at Frankfurt in April, so I really doubt it's the same wedge you were offered! Wouldn't even say it's in production yet.