ProSoundWeb Community
Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums => SR Forum Archives => Lighting FUD Forum Archive => Topic started by: Shanne Flemming on May 23, 2010, 11:49:26 AM
-
I have had several of the Martin Freekie lighting boards and there appears to be a common problem that they lose shows and banks? Does anyone know why this is and if there is a perm fix? Big flaw with these boards is that they don't backup the programming to external flash.
-
Is there an internal battery?
-
Not sure of a fix, but I too own one of these boards. Shortly after my initial purchase (within a few days) the Freekie was "freaking" out on me pretty badly. It would lose banks, shows, and everything in between. Setting the unit back to factory default didn't even help. I ended up sending it back to Martin on a warranty claim and they replaced the whole circuit board. Since the repair it has only flaked out on me once. (Of course now that I write this I will probably find it blanked out at home this evening.) I have owned the unit for approximately two years. All in all it has been a good unit, nothing to completely rave about. I see it for what it is. I know I will need to invest in something more robust in the near future.
So not much help but I did want to pass on that I have had the same issues. Maybe try a warranty claim if you can. Seemed to help me.