ProSoundWeb Community
Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums => LAB: The Classic Live Audio Board => Topic started by: Weogo Reed on October 30, 2011, 09:54:44 PM
-
Hi Y'all,
Anybody heard the Community MX10?
22#, 1.25" HF exit, crossover at 1000Hz.
Use would be modest-level monitor on lower-budget folk-music stages.
Thanks and good health, Weogo
-
Bump - anybody have experience with this box?
Thanks and good health, Weogo
-
Hello Weogo,
I thought I'd resurrect your thread to see if others had experiences to share, and also to share a link with a real world review: http://www.churchproduction.com/go.php/article/first_look_community_mx10_stage_monitor
I should point out that the dispersion is actually 100 degrees conical for the 10", not 115 as this article states. I think the 8" is 115.
I had been using FBT Verve 8m for small monitors, but they're being replaced by the Verve 108, which will be non-coax and not a wedge. I think the mx10 might be just the ticket.
Grant