ProSoundWeb Community
Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums => Wireless and Communications => Topic started by: Doug Dessero on January 16, 2021, 04:38:21 PM
-
Will this, Telex Audiocom IC-6SX 6 In,12 Out Source Assign Panel, work in a Clearcom 4 channel intercom system?
I know it's for 6 channels, gives me spares.
-
Will this work in a Clearcom 4 channel intercom system?
I know it's for 6 channels, gives me spares.
Please go to your profile and change the "Name" field to your real first and last name as required by the posting rules displayed in the header at the top of the section, and in the Site Rules and Suggestions (http://forums.prosoundweb.com/index.php/board,36.0.html) in the Forum Announcements section, and on the registration page when you registered.
Mac
admin
-
Will this, Telex Audiocom IC-6SX 6 In,12 Out Source Assign Panel, work in a Clearcom 4 channel intercom system?
I know it's for 6 channels, gives me spares.
It will, but . . . The Telex unit switches both pins 2 & 3 while CC requires only pin 3 to be switched. Although the routing function will be fine, there could be popping when switching buses as the user stations cycle power.
-
It will, but . . . The Telex unit switches both pins 2 & 3 while CC requires only pin 3 to be switched. Although the routing function will be fine, there could be popping when switching buses as the user stations cycle power.
Although that could also add a very handy Remote Mic Kill Function... :)
-
It will, but . . . The Telex unit switches both pins 2 & 3 while CC requires only pin 3 to be switched. Although the routing function will be fine, there could be popping when switching buses as the user stations cycle power.
Thanks again Henry.