ProSoundWeb Community

Church and H.O.W. – Forums for HOW Sound and AV - Your Displayed Name Must Be Your Real Full Name To Post In The Church and HOW Forums => Church Sound => Topic started by: shadhall on April 05, 2011, 01:55:46 PM

Title: Channel EQ's not affecting CD
Post by: shadhall on April 05, 2011, 01:55:46 PM

hi,

i'm running the second cd player for playback into ch.7, which is a stereo channel, via two 1/4" jacks on mackie's 808-s powered mixer. ( pdf manual: www.mackie.com/pdf/ppm_om.pdf (http://www.mackie.com/pdf/ppm_om.pdf) ) the issue is that the channel eq's do not affect the playing cd audio at all. this seems weird to me. i looked at page 33 with the wiring schematic, but maybe i just don't know how to read a wiring schematic.

thanks,
shad
:D

Title: Re: Channel EQ's not affecting CD
Post by: Kent Thompson on April 05, 2011, 02:53:41 PM

Quote from: shadhall on April 05, 2011, 01:55:46 PM

hi,

i'm running the second cd player for playback into ch.7, which is a stereo channel, via two 1/4" jacks on mackie's 808-s powered mixer. ( pdf manual: www.mackie.com/pdf/ppm_om.pdf (http://www.mackie.com/pdf/ppm_om.pdf) ) the issue is that the channel eq's do not affect the playing cd audio at all. this seems weird to me. i looked at page 33 with the wiring schematic, but maybe i just don't know how to read a wiring schematic.

thanks,
shad
 :D

Which outputs are you listening too? Is your power amp routing switch pushed in? With that switch in the right output becomes a monitor feed which has no eq.