Chris Parsons wrote on Wed, 08 September 2004 22:17 |
I've decided to finally build two of these monsters. They will go under my JBL 4732's. I have a series of questions that may have allready been asked but i'd like to know what everyone thinks TODAY Is there any reason(s) to NOT build version 3.0? |
Chris Parsons wrote on Wed, 08 September 2004 22:17 |
I live in Santa Cruz, CA. Any suggestions from you bay area people as to where I can get 3/4" baltic birch? |
Al Limberg wrote on Thu, 09 September 2004 18:30 |
Maybe Brad will chime in and give us his feelings on degree of difficulty,etc. Al |
Chris Parsons wrote on Thu, 07 October 2004 23:24 |
So yesterday I finally finished all four of my baffles. Then I realized that they were all identical! DOH! Well, at least I had enough 1/2" stock to fix the problem. Tonight I started to glue one of the modules together. I got everything to fit pretty exact, except for the bottom piece is only flush with the corner of one baffle, not both. The other side is about a 1/16" off. Hopefully the expanding qualities of guerrilla glue will solve this problem. Biscuit-Joiner... used it for the first time today. Does anyone have any tips about this tool. I've got the dewalt type. When I cut slots on two pieces without moving the guide, the pieces don't line up perfectly flush. They're about an 1/8" off. |
Chris Parsons wrote on Thu, 07 October 2004 23:24 |
Also, my biggest question is about angled pieces of wood. Should the biscuits be in straight, or at an angle? How do you guys approach this? Thanks to all of you for helping me out here. -Chris Parsons |
Chris Parsons wrote on Thu, 07 October 2004 22:24 |
The other side is about a 1/16" off. Hopefully the expanding qualities of guerrilla glue will solve this problem. |