David Oh wrote on Wed, 03 November 2010 02:38 |
Considered the Yamaha 01V96VCM digital mixer, but it didn't have enough channels. |
David Oh wrote on Wed, 03 November 2010 01:38 |
Hi, we have 3 pastors who rotate preaching..... - David |
Evan Kirkendall wrote on Wed, 03 November 2010 13:01 |
32 channels(28 XLR) isn't enough? |
Jeff Wheeler wrote on Wed, 03 November 2010 23:11 | ||
It will even accept an MY16-AT card, so you can have 32 full-featured channels, plus you can route four more mic pre-amps into the stereo channel strips if you really must. |
Dick Rees wrote on Wed, 03 November 2010 12:05 | ||
This is why wireless mics work so well. When they rotate, they won't wrap the cord around themselves. |
David Oh wrote on Thu, 04 November 2010 02:13 |
The 01V96VCM has 16 analog input channels. Maybe you're thinking about a different mixer.; |
Dick Rees wrote on Wed, 03 November 2010 14:05 | ||
This is why wireless mics work so well. When they rotate, they won't wrap the cord around themselves. |
George Friedman-Jimenez wrote on Fri, 05 November 2010 01:41 | ||||
Dick, your concrete humor had me rolling on the floor! Next you are going to start with the whirling dervish jokes. |
Don McMeckan wrote on Thu, 04 November 2010 02:30 |
I bought 2 Behringer stereo "tube" mic pres, and with 2 ADA 8000 had a full 32 mic channels. Worked great! I think I paid about Can $125 each new for the 2 channel pres. |
Rick Byers wrote on Fri, 12 November 2010 15:02 | ||
I just put toms through them via balanced jack adaptors, and there's plenty of gain to handle that with no extra mic pres required. |
Dick Rees wrote on Thu, 04 November 2010 10:11 | ||
.....with the ability to add 16 more with the proper input card and outboard pre-amps. You need to take a closer look at the board or the manual. Added channels are accessed by simply selecting the second level of faders. 16 faders x 2 layers = 32 inputs. |
danfowler wrote on Tue, 08 March 2011 22:13 |
You think those are cool, check mine out............ http://fatproduction.webs.com/apps/photos/album?albumid=1051 3684 Mine are shock/vibration damping. Something to consider when putting a 30# computer in a case. later, Dan 0;) |