ProSoundWeb Community

Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums => LAB Subwoofer Forum => Topic started by: Nick Enright on April 28, 2017, 12:12:41 PM

Title: Anyone Recognize this Driver?
Post by: Nick Enright on April 28, 2017, 12:12:41 PM
a friend of mine has a cabinet that this driver fit in, it shows no continuity, is there a re-cone? or alternately what driver is it and what are the specs?

Thanks!
Nick
Title: Re: Anyone Recognize this Driver?
Post by: Casey McDonald on April 28, 2017, 12:44:02 PM
a friend of mine has a cabinet that this driver fit in, it shows no continuity, is there a re-cone? or alternately what driver is it and what are the specs?

Thanks!
Nick

It looks like an older EV SRO 15B - but that's only going by what it "looks" like basket, magnet, etc.

Casey
Title: Re: Anyone Recognize this Driver?
Post by: Nick Enright on April 28, 2017, 01:14:49 PM
It looks like an older EV SRO 15B - but that's only going by what it "looks" like basket, magnet, etc.

Casey

Thanks!
nick
Title: Re: Anyone Recognize this Driver?
Post by: Ivan Beaver on April 29, 2017, 10:45:03 AM
It looks like an older EV SRO 15B - but that's only going by what it "looks" like basket, magnet, etc.

Casey
I would agree that it looks like an old EV.  Model number-I'm not sure.

But EV did not have a lot of models of that type back then
Title: Re: Anyone Recognize this Driver?
Post by: Pete Erskine on April 29, 2017, 12:18:31 PM
a friend of mine has a cabinet that this driver fit in, it shows no continuity, is there a re-cone? or alternately what driver is it and what are the specs?

Thanks!
Nick

Google T5558 cone

Title: Re: Anyone Recognize this Driver?
Post by: Ivan Beaver on April 29, 2017, 02:29:10 PM
It looks like an older EV SRO 15B - but that's only going by what it "looks" like basket, magnet, etc.

Casey
The EV 15B had a smooth cone.

That one has ridges.  So that would indicate a 15L

HOWEVER-the part number on the cone is a Waldom-so it has a generic recone kit in it.

The EV15B and 15L parts fit either one.

But if remember correctly, those old EVs used a cupped spider.

The later (as in the 70s and later) ones used a flat spider.
Title: Re: Anyone Recognize this Driver?
Post by: Mike Caldwell on April 30, 2017, 06:39:45 PM
I'm going to say SRO without the can over the magnet.