Lee Jacobson wrote on Wed, 25 April 2007 08:07 |
I have a show this week where it will do passive wedges in a real setting. Then I'll replace on AP6020 with the F1200TS, match the gains, and run the TX rig with it for a while, followed by one of the PL236s in the 4mix racks. |
Lee Jacobson wrote on Wed, 02 May 2007 08:16 |
Sara, I do intend to use the amp for other stuff as well, and report on the performance. It is a solid, good sounding amp, but still an amplifier. It ain't rocket surgery.... |
Mark Steven Lewis wrote on Tue, 22 April 2008 12:01 |
Questions I'm wondering about that limit switch. First, how dangerous is it to run unlimited in a parallel/dual channel mode? That might give me the additional headroom to run maybe 1400-1500 watts per side into 4 ohms. Does unlimiting really invalidate the sweet warranty? If so, how is that monitored? How dangerous is it to leave the limiter on and run bridged into 4 ohms? So each side of the amp is seeing 2 ohms. This is what I get in my high output configuration. I'm wondering if this is a stable and reasonable configuration. Comments and suggestions welcome. ... Mark SactownSounds.com |