ProSoundWeb Community
Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums => Installed Sound/Contracting => Topic started by: Scott Hofmann on February 11, 2021, 06:06:56 PM
-
I'm trying to do CNC cutouts in a foam drawer insert for the Shure QLX-D2 handheld transmitter with SM58 head.
I haven't bought the unit yet.
The manual says length is 10.6"; Shure's CAD drawing says 9.981".
Will be experimenting with how much oversize to make them.
Can anyone measure one?
Thank you.