ProSoundWeb Community
Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums => Wireless and Communications => Topic started by: John Ritchie on September 17, 2016, 12:00:08 PM
-
Need a lot of help in a hurry. Have a Shure 300 wireless IEM system with a P3R receiver. I can scan on the receiver for an open channel and it will come up without a problem EXCEPT...the blue LED will not light up, thus the receiver is obviously NOT transmitting. I can't sync to the transmitter and I have absolutely no success making this thing work. It is only two months old and has worked flawlessly for the entire time...until now when I have a huge gig tonight and need them the most. Really disappointed in this product. Is there anyone out there who has had a similar problem?
-
Need a lot of help in a hurry. Have a Shure 300 wireless IEM system with a P3R receiver. I can scan on the receiver for an open channel and it will come up without a problem EXCEPT...the blue LED will not light up, thus the receiver is obviously NOT transmitting. I can't sync to the transmitter and I have absolutely no success making this thing work. It is only two months old and has worked flawlessly for the entire time...until now when I have a huge gig tonight and need them the most. Really disappointed in this product. Is there anyone out there who has had a similar problem?
Well, the receiver doesn't transmit, it receives.
Ok, you CAN set the transmitter manually to the same group & channel the receiver found.
I assume new battery in the receiver.
What does the sync status on the transmitter say?
What group/channel did the receiver find?
Sent from my iPad using Tapatalk HD