ProSoundWeb Community

Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums => LAB: The Classic Live Audio Board => Topic started by: Dean Spyropoulos on May 23, 2019, 01:21:44 AM

Title: VTC DLMS 4080 reset
Post by: Dean Spyropoulos on May 23, 2019, 01:21:44 AM

Hi friends,

I have the VTC DLMS 4080 and I can't make the software connect to the box, either by USB or RJ45. It says the password is wrong, even when there is no password. I tried creating the password on the front panel of 1234 just so there were no blanks, but that didn't work either.

Google hasn't been terribly helpful - grateful if there are any users out there that can assist. I should say it is fully usable from only the front panel but I would prefer to use the software, which is running on an old XP laptop.

Many thanks
Dean

Title: Re: VTC DLMS 4080 reset
Post by: Doug Johnson on May 23, 2019, 10:51:36 AM

Try calling VTC (Yorkville), they have always been quite helpful to me in the past.  Also IIRC the DLM-4080 is a rebadged Xilica  XP-4080 so you make find the info you want searching that unit.