ProSoundWeb Community

Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums => SR Forum Archives => LAB Lounge FUD Forum Archive => Topic started by: Sean M Lehman on December 09, 2006, 06:10:08 PM

Title: VerTec wiring?
Post by: Sean M Lehman on December 09, 2006, 06:10:08 PM
The vt4880 have 2 lf drivers x 8 ohms, so is the box 4 or 16 ohm?

Also, the input power ratings given, for example 2000w... is this continuous, program or peak?


I'm doing some research on the VerTec speakers...this is just for an assignment I have for a class...so i'm not buying...

thanks
Title: Re: VerTec wiring?
Post by: Chris Hinds on December 10, 2006, 07:59:01 AM
I believe the boxes have an NL4 with one driver wired to the 1+/1- and one wired to 2+/2-.  You could hook both to a single channel for a 4 ohm load, but it would not be sensible to make it a 16 ohm load... you'd never find an amplifier big enough.

Regards

Chris