ProSoundWeb Community

Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums => Audio Measurement and Testing => Topic started by: Miguel Angel Castro Rios on October 14, 2016, 11:06:23 AM

Title: Behringer 404hd Trouble, help please
Post by: Miguel Angel Castro Rios on October 14, 2016, 11:06:23 AM

I just bought a Behringer Audio Interface, it comes with this feature to listen to realtime for recording, but I will use it for measurment.
It tells me that I can use the "mix knob" to bring down the realtime level to the output from the inputs. Still no luck, I set up my measurment mic and it comes right out the output, with the mix knob all the way down. This creates a feedback loop, has anyone had this issue before?


I'm running on windows 8.1 and installed the driver from behringer website.

Title: Re: Behringer 404hd Trouble, help please
Post by: Mark Wilkinson on October 15, 2016, 07:18:00 PM

Hi Miguel,  what measurement program are you using?

I would think that your output to whatever program you are using  is via USB , not from a physical output. 
Then, the input channel gain is the only output adjustment.  The Mix control has no effect.