ProSoundWeb Community

Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums => Installed Sound/Contracting => Topic started by: John Uren on May 06, 2017, 04:28:06 PM

Title: School Installation
Post by: John Uren on May 06, 2017, 04:28:06 PM
We have just had two EV 400 watt speakers hard wired into our school performance area.
They are hooked up with a speakon jack.
That is all we have.
It is a small area.
I need recommendations on the proper mixer, cable to the speakon connector and good reliable headset wireless microphone.
The speakers are overkill for that area. It will mainly be used for speaking engagements. Sometimes for audio from a movie or computer source.
Any help would be greatly appreciated.
Thanks
John
Title: Posting Rules
Post by: Mac Kerr on May 06, 2017, 06:03:59 PM
Any help would be greatly appreciated.
Thanks
John

Please go to your profile and change the "Name" field to your real first and last name as required by the posting rules displayed in the header at the top of the section, and in the Site Rules and Suggestions (http://forums.prosoundweb.com/index.php/board,36.0.html) in the Forum Announcements section, and on the registration page when you registered.

Mac
Title: Re: School Installation
Post by: Jean-Pierre Coetzee on May 07, 2017, 03:18:58 AM
Would need a lot more information such as budget and such and you will likely get the advice to hire a consultant / av integrator since it seems your technical know how isn't great.

A drawing of the space is also usually quite useful

What model is those EV speakers that 400w could be peak or program power?

Have you got some sort of wireing diagram for the cabling already install/is there any cabling installed?

You say that 2 EV loudspeakers were just hard wired into your performance area, who did this and why don't you get that company/person to complete the rest of the installations
Title: Re: School Installation
Post by: Ivan Beaver on May 07, 2017, 07:57:15 AM
We have just had two EV 400 watt speakers hard wired into our school performance area.
They are hooked up with a speakon jack.
That is all we have.

How do you end up with 2 speakers that are wired in and nothing else?

What other gear you need depends on what you plan on using the system for-how many inputs?  what type of inputs? mics-video-audio playback-instruments etc