ProSoundWeb Community

Church and H.O.W. Forums for HOW Sound and AV - Your Displayed Name Must Be Your Real Full Name To Post In The Church and HOW Forums => H.O.W. AV => Topic started by: John Bryan on September 13, 2018, 11:49:47 AM

Title: Audio Snakes
Post by: John Bryan on September 13, 2018, 11:49:47 AM
We have a snake which runs from the front of our sanctuary (behind the choir loft in a small room) to our media room in the rear. To accommodate our praise instruments, we ran a new snake from the front of the pulpit to inputs on the existing snake. We have wireless guitar receivers input into the new snake. Our problem is this, when the guitar receivers are plugged in and turned on, the faders on the mixer for the guitars affect the volume on other inputs from the original snake. When we turn off the guitar receivers it goes away. When the guitar receivers are plugged into the original snake inputs, we don't have a problem. Plugging into the original snake is not an option due to its location. Any answers? We use a PreSonus StudioLive mixer. I have wondered if running a snake into another snake might be the problem or if we are getting some sort of feed from the wireless guitar receivers but we have wireless mic receivers plugged into the original snake with no problems. All frequencies have been checked and no duplication. Please don't ask why it's set up as it is. It was done by a former "expert" who didn't think Shure wireless mics would transmit 50'.
Title: Posting Rules
Post by: Mac Kerr on September 13, 2018, 12:44:16 PM
We have a snake

Please go to your profile and change the "Name" field to your real first and last name as required by the posting rules displayed in the header at the top of the section, and in the Site Rules and Suggestions (,36.0.html) in the Forum Announcements section, and on the registration page when you registered.