ProSoundWeb Community
Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums => LAB Lounge => Topic started by: Michael Webb on March 27, 2011, 04:56:43 AM
-
what will be my best choice for processor for my kf 600s i just purchased ...... bbe 48 for the money and also where can i get good used flybars let me know mlw..
-
what will be my best choice for processor for my kf 600s i just purchased ...... bbe 48 for the money and also where can i get good used flybars let me know mlw..
Does this scare anyone besides me?
-
Does this scare anyone besides me?
Yes, malformed sentence structure and poor grammar can be scary.
-
what will be my best choice for processor for my kf 600s i just purchased ...... bbe 48 for the money and also where can i get good used flybars let me know mlw..
to turn this around
the question should be:
what will be best choice for kf 600s the ux8800 or lm26?
http://lake.labgruppen.com/
http://www.eaw.com/products/ux8800/ux8800_splash.html
-
Well, the EAW processors are best choice of course - but we just use a DP448 on the 600s with perfectly good results
-
Yes, malformed sentence structure and poor grammar can be scary.
You missed the point: buying a BBE processor because it's cheap (regardless of its suitability for the job) and then asking about flyware. I foresee the suspension of loads above humans being done by someone ill-prepared for the responsibility.
You may now return to your role as sentence inspector....
Have fun, dodge the speakers.
Tim Mc
-
Well, the EAW processors are best choice of course - but we just use a DP448 on the 600s with perfectly good results
thanks for the reply i think this is a site that lets un supervised kids try to answer the ? not talking about you..
-
thanks for the reply i think this is a site that lets un supervised kids try to answer the ? not talking about you..
Just because you don't like an answer doesn't make it wrong, and when asking questions on a public forum you get all kinds of responses that you probably didn't anticipate.
-
Well I think I'd be somewhat qualified to answer your question as we own and use KF600.
-
to turn this around
the question should be:
what will be best choice for kf 600s the ux8800 or lm26?
http://lake.labgruppen.com/
http://www.eaw.com/products/ux8800/ux8800_splash.html
What they said. It helps if your 600s are consistent with all the other 600s out there.
-
What would be the best fuel for my Audi S4? The gas cap says 91 Octane or better right inside it, but I used water because it fit my budget.
-
What would be the best fuel for my Audi S4? The gas cap says 91 Octane or better right inside it, but I used water because it fit my budget.
Who's driving, you or Mac?
-
If there's a greybox for it, the only valid processor for any EAW speaker is the EAW UX8800.
KF650e and z have a greybox.
If you have a older model, use something decent. Lake, XTA, BSS etc. Insert factory presets found here:
http://eaw.com/info/EAW/Processor_Settings/Legacy_Products/
IMHO :)
-
If there's a greybox for it, the only valid processor for any EAW speaker is the EAW UX8800.
KF650e and z have a greybox.
If you have a older model, use something decent. Lake, XTA, BSS etc. Insert factory presets found here:
http://eaw.com/info/EAW/Processor_Settings/Legacy_Products/
IMHO :)
That's an old (2008) greybox list; there are a lot more available now. Not sure how to find the current list, though, without downloading EAW Pilot.
-
One of the guys in the band I work for has an old EAW processor, not sure if it was for 600s or 650s. If cost is an issue I can call him and get him to read the back of it and let me know. If it's the right one then I'll just hook you two guys up and let you all work out the details.
-
That's an old (2008) greybox list; there are a lot more available now. Not sure how to find the current list, though, without downloading EAW Pilot.
It's the generic processing settings for older EAW boxes without a greybox.
kf600 doesn't have a greyboc AFAIK, hence the link :)