ProSoundWeb Community
Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums => LAB: The Classic Live Audio Board => Topic started by: Montez Carter on July 10, 2014, 10:05:00 PM
-
Hello all, I have 8 of the QSC 6.0II's that mainly stay on sub duty for my SB1000Z's i only run 1 cab per side for a 4 ohm load as I tried 2 ohm once while in a pinch and they sound horrible at 2 ohms so they stay at 4 ohm. I bounce these racks back and forth between the SB's and some Martin WS218X subs. I am trying to build up enough amps to run the Martin system and the EAW rig if they are out on two different gigs. I find these used on ebay but I am looking for thoughts on some alternatives that I could find used. I like 6.0's but they stay into clip alot on the Martins as I feel they could handle more as the guy I purchased them from had FP14K's on them and they sounded shall you say more agressive on kick but they are out of my price range. I am seeing some Itech 6K's for sale used and I can find enough to buy at one time. Would anyone recommend those or any other thoughts to power these that I can find used or second hand? Personal experiences would be greatly appreciated.
-
I have some used K6s for sale that would do the job.
-
If you decide to stay with the QSC's, we have enough 6.0pfc that we can help you out with. They are in excellent condition.
Be careful if are planning to mix the QSC and Itechs. You will need to compensate for the Itech propagation time. Also, the Itech 6k's are for all intents essentially the same power as the 6.0.
Raul Suarez
Third Ear Sound
-
If you decide to stay with the QSC's, we have enough 6.0pfc that we can help you out with. They are in excellent condition.
Be careful if are planning to mix the QSC and Itechs. You will need to compensate for the Itech propagation time. Also, the Itech 6k's are for all intents essentially the same power as the 6.0.
Raul Suarez
Third Ear Sound
Though a K6 (as Mike suggested) isn't the same as a 6k.
Sent from my iPad using Tapatalk HD
-
QSC PL380 about the same power only 2 rack space.
-
Hello all, I have 8 of the QSC 6.0II's that mainly stay on sub duty for my SB1000Z's i only run 1 cab per side for a 4 ohm load as I tried 2 ohm once while in a pinch and they sound horrible at 2 ohms so they stay at 4 ohm. I bounce these racks back and forth between the SB's and some Martin WS218X subs. I am trying to build up enough amps to run the Martin system and the EAW rig if they are out on two different gigs. I find these used on ebay but I am looking for thoughts on some alternatives that I could find used. I like 6.0's but they stay into clip alot on the Martins as I feel they could handle more as the guy I purchased them from had FP14K's on them and they sounded shall you say more agressive on kick but they are out of my price range. I am seeing some Itech 6K's for sale used and I can find enough to buy at one time. Would anyone recommend those or any other thoughts to power these that I can find used or second hand? Personal experiences would be greatly appreciated.
http://www.speakerpower.net/