ProSoundWeb Community

Church and H.O.W. – Forums for HOW Sound and AV - Your Displayed Name Must Be Your Real Full Name To Post In The Church and HOW Forums => Church Sound => Topic started by: Andrew Makinson on June 21, 2015, 08:41:03 PM

Title: Allen & Heath ME
Post by: Andrew Makinson on June 21, 2015, 08:41:03 PM

I'm seriously considering the Allen & Heath ME1 personal mixers.  Can someone tell me how the Me-U has to be setup for Dante?  It seem like you can only buy it in one configuration, and then you have to add some Dante card.  I'm not sure what card that is.

Title: Re: Allen & Heath ME
Post by: Caleb Dueck on June 21, 2015, 10:26:04 PM

The ME-U distro has a card slot.  That slot comes stock populated with the dSnake (?) card.  You buy the Dante card, swap cards, and now the ME-U takes in Dante and splits out to the ME-1's. 

Title: Re: Allen & Heath ME
Post by: Andrew Makinson on June 22, 2015, 08:14:33 AM

Quote from: Caleb Dick on June 21, 2015, 10:26:04 PM

The ME-U distro has a card slot.  That slot comes stock populated with the dSnake (?) card.  You buy the Dante card, swap cards, and now the ME-U takes in Dante and splits out to the ME-1's.

Thanks. I'm assuming the only Dante card is the Allen & Heath M-Dante Interface Card.  I'll look into that route.

Title: Re: Allen & Heath ME
Post by: Caleb Dueck on June 22, 2015, 12:17:23 PM

Yes