ProSoundWeb Community
Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums => SR Forum Archives => LAB: The Classic Live Audio Board FUD Forum Archive => Topic started by: (Brian) Frost on November 28, 2005, 03:13:15 PM
-
Can I create 2 mono effects on a TC m3000? Im hoping to use the Left channel for a decent room verb, and the right channel for a delay. I want it to work like 2 mono boxes with an aux send to each half and a mono out of each side.
Frost
-
yes it can.
In the routing page, set it to Dual Mono mode and presto your good.
sincerely,
db
-
Frost,
That's how I have mine set up, dual mono mode like Dan said. I use first engine for vocal reverb and 2nd engine for snare reverb. It works good.
Robert Pham
-
Thank you very much. I time to spend some money.
Frost