ProSoundWeb Community

Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums => LAB: The Classic Live Audio Board => Topic started by: TomBoisseau on March 09, 2017, 08:56:36 PM

Title: Shure ANI4IN-XLR & ANI4OUT-XLR Dante Interfaces
Post by: TomBoisseau on March 09, 2017, 08:56:36 PM
I was wondering if anyone here had personal experience using the Shure ANI4IN-XLR or ANI4OUT-XLR Dante interfaces? Specifically, I would be using them with a Yamaha QL5, and I'm wondering if there will be any way to directly access the "trims" from the console or from Dante Controller?

Thanks,
Tom

Title: Re: Shure ANI4IN-XLR & ANI4OUT-XLR Dante Interfaces
Post by: Mac Kerr on March 09, 2017, 09:16:36 PM
I was wondering if anyone here had personal experience using the Shure ANI4IN-XLR or ANI4OUT-XLR Dante interfaces? Specifically, I would be using them with a Yamaha QL5, and I'm wondering if there will be any way to directly access the "trims" from the console or from Dante Controller?

Thanks,
Tom

Not from Dante Controller, Audinate does not want to deal with lots of manufacturer's protocols, but maybe from Shure if they sell enough of them, they did work out the interface for the ULXD and QLXD mics, and the Yamaha control will be the same.

Mac