ProSoundWeb Community

Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums => Audio Measurement and Testing => Topic started by: Only Wang on September 05, 2013, 12:03:30 pm

Title: Hw can i get the phase of every speaker for a theatre system via smaart 7?
Post by: Only Wang on September 05, 2013, 12:03:30 pm
hi everybody Am new guy here, who could help me to figure it out? ;D
Title: Re: Hw can i get the phase of every speaker for a theatre system via smaart 7?
Post by: Arthur Skudra on September 05, 2013, 02:34:51 pm
hi everybody Am new guy here, who could help me to figure it out? ;D
Phase is only one of several parameters used in evaluating a loudspeaker system.  More info is needed so that responses are more helpful for your situation.  Describe the equipment your measuring (what kind of speaker, where it's placed), the room you're in, and your measurement equipment and setup as well, and what you plan to do with the information (your goals for the speaker system).
Title: Re: Hw can i get the phase of every speaker for a theatre system via smaart 7?
Post by: Ivan Beaver on September 05, 2013, 08:26:01 pm
hi everybody Am new guy here, who could help me to figure it out? ;D
"Getting the phase response" is not exactly an easy thing-especially in an install in a room.

There will be all sorts of boundaries that the sound will bounce off of and give a different phase response-depending on the location of the mic.

Knowing what you are actually trying to achieve would help greatly in getting responses that can actually help you.
Title: Re: Hw can i get the phase of every speaker for a theatre system via smaart 7?
Post by: Adam Black on September 06, 2013, 09:36:05 am
hi everybody Am new guy here, who could help me to figure it out? ;D

Sounds to me like your intent is to check the polarity of each speaker. In either case a good starting point would be to review the help file. It contains an overview which you may find helpful.