ProSoundWeb Community

Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums => Pro AV Forum => Topic started by: Jack Hoff on June 23, 2017, 12:51:06 AM

Title: PA2 + Onboard DSP?
Post by: Jack Hoff on June 23, 2017, 12:51:06 AM

Since its obvious that Im not going to get an answer to my question I am just going to update this.

Since the original issue has been resolved I am going to update this to say this:

The registration page currently says  "YOU HAVE THE ABILITY, AS YOU REGISTER, TO CHOOSE YOUR OWN USERNAME." 

And you can get from the registration page and post into the Pro AV forum without actually coming into the Pro AV forum where you can see the sticky at the top.


If you want 100% compliance, put your rules on the registration page where people can see them.   Not lock threads for not following rules hidden deep in the forum in a stickied post.

It really is as simple as pointing out there are additional rules and including a link to them right on the registration page.     
   

Title: Posting Rules
Post by: Mac Kerr on June 23, 2017, 08:38:23 AM

Quote from: tunaman on June 23, 2017, 12:51:06 AM

I recently purchased a JBL Srx800 setup

Please go to your profile and change the "Name" field to your real first and last name as required by the posting rules displayed in the header at the top of the section, and in the Site Rules and Suggestions (http://forums.prosoundweb.com/index.php/board,36.0.html) in the Forum Announcements section, and on the registration page when you registered.

Mac