ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: questions about stage designer 24  (Read 859 times)

chris ogden

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
questions about stage designer 24
« on: December 16, 2007, 10:24:32 am »

Hello.  I am a definite noob when it comes to lighting, so any help would be greatly appreciated.  I purchased 8  par 56 cans that are going into eliminator ed 15 dimmer packs.  Four lights per dimmer.  I am trying to use a stage designer 24 controller.  I don't have any idea on how to get it up and running.  I have both controllers set with dip switch 10 up for slave/dmx controlling.  I have a dmx address set on the first dimmer pack.  1,3,5 dip switches are up for an address of 21.  Like I said, I don't have any idea of what I'm doing.  Do you have to set a DMX address on the controller as well?  If so, how?  I have all these pretty lights and I'm too stupid to get them to work!  I'm a drummer not a light guy.
Logged

Tony "T" Tissot

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3902
    • http://www.4dbsound.com
Re: questions about stage designer 24
« Reply #1 on: December 16, 2007, 11:42:23 pm »

The manual that comes with the SD 24 is the worst of any Chiglish manual ever written.
Logged
MNGS
ProSoundWeb - Home of 50,000 audio professionals - and two or three curmudgeonly SOBs.
Pages: [1]   Go Up
 

Page created in 0.116 seconds with 18 queries.