ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: house of representatives PA System  (Read 1801 times)

Oscar Castro

  • Newbie
  • *
  • Offline Offline
  • Posts: 35
house of representatives PA System
« on: February 24, 2011, 01:29:40 pm »

I'm just wondering, what kind of system they use?  like mixer, mics and how they operate in order of use the mic system, is there an operator or how that work?

Thanks!   ???
Logged

John Roberts {JR}

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 16411
  • Hickory, Mississippi, USA
    • Resotune
Re: house of representatives PA System
« Reply #1 on: February 24, 2011, 02:12:39 pm »

I believe they are using a computer based system with hundreds of zones. Original work done by Peak Audio, but now under Media Matrix ,  last I heard.

JR
Logged
Don't tune your drums half-ass. Listen to what a properly "cleared" drum sounds like.   http://circularscience.com/

Jonathan Schroeder

  • SR Forums
  • Jr. Member
  • *
  • Offline Offline
  • Posts: 51
  • Houston, Tx
Re: house of representatives PA System
« Reply #2 on: February 24, 2011, 02:36:26 pm »

Last time I sat in the Gallery for I believe the House (although it may have been the senate) there was an operator sitting up in the corner (Left side as you face the speaker's seat) on a small format Yamaha Digital (either 01v(96?) or DM1000, I didn't look too close) .  He spent most of the time reading a book, but when the speaker changed from one podium to another he switched faders. 


This was a few years ago, so things may have changed since then.


Jon
Logged

Frank DeWitt

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 996
    • LBP DI Box
Re: house of representatives PA System
« Reply #3 on: February 24, 2011, 02:44:06 pm »

Contact Ray Rayburn over at http://www.soundfirst.com/

He will tell you all about it.  Highly custom, all redundant ETC.

Frank
Logged
Not to Code

Randy Pence

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 394
  • Berlin, Germany
Re: house of representatives PA System
« Reply #4 on: February 24, 2011, 05:14:35 pm »

Last time I sat in the Gallery for I believe the House (although it may have been the senate) there was an operator sitting up in the corner (Left side as you face the speaker's seat) on a small format Yamaha Digital (either 01v(96?) or DM1000, I didn't look too close) .  He spent most of the time reading a book, but when the speaker changed from one podium to another he switched faders. 


This was a few years ago, so things may have changed since then.


Jon

the tech would be surfing a phone or tablet. :P
Logged

Brad Weber

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2209
  • Marietta, GA
Re: house of representatives PA System
« Reply #5 on: February 27, 2011, 10:04:17 am »

Contact Ray Rayburn over at http://www.soundfirst.com/

He will tell you all about it.  Highly custom, all redundant ETC.
I believe that work was done as part of Ray's 'day job' at K2 Audio, http://www.k2audio.com/.
Logged

ProSoundWeb Community

Re: house of representatives PA System
« Reply #5 on: February 27, 2011, 10:04:17 am »


Pages: [1]   Go Up
 



Page created in 0.074 seconds with 26 queries.