Let's see. Standard rackmount "Middle Atlantic" power strips in the processing racks, and metal quadboxes with edison outlets in the amp racks. All amp racks take an L5-20 inlet for power mounted on the i/o panel. Amp racks and such are supplied with either a 25, 50, or 100' 12/3 SOOW cord of which I have about 400 feet of. There are a few 15' SJOOW cords I use for stage power drops for musicians's pedalboards and such. Main stage power is handled by a 40' long 12/3 SOOW cord with quadboxes mounted with one of them at 4' in, and the other at the end of the cord for stage left and stage right power.
From there it goes to one of my distros. The main distro has 4 20 amp circuits and 4 edison outlets and is supplied by a 60' section of 6/4 feeder.
The other B system distro is built like a small suitcase so it can carry it's own 50' of 10/4 feeder. It is equipped with 2 20 amp circuits and 1 15 amp convenience outlet.
Oh, wattage wise the A rig that uses the main distro is 6kw to subs and 2kw to tops and 1.5kw to monitors (if I am only doing 2 mixes)
B system that uses the smaller suitcase distro is 1kw to subs, 600w to tops and 600w to monitors.